Download
Laboratory
Basically every type of programmable process-indicator with one or more SPDT relay outputs can be programmed as an ON/OFF controller.
Basically every type of programmable process-indicator with one or more SPDT relay outputs can be programmed as an ON/OFF controller.
Process Indicator with Bargraph BG101 series
- Universal analog input
- 4-digit LED display + 101-segment LED bargraph; keypad
- programmable range and dec. point
- panel mountable, protection IP30
- Optional: up to 4 output relays; current output 4-20mA; RS485 interface; integrated 24VDC power supply for transmitter
Programmable Process Indicator 4002-D series
- Any input type possible on request
- 4 programmable SPDT relay outputs
- 35mm DIN rail mounting
- Optional 24V auxiliary power supply
- Optional passive 4-20mA current output or serial interface RS 485
Programmable Process Indicator with Bargraph BG51 series
current input 0(4)-20mA or voltage input 0-10(1)V, 51 element LED bargraph, scale from 0 to 100% or in physical units, panel mountable, IP30.
Programmable Process Indicator with Bargraph BG151 series
- Input: current 0(4)-20mA, voltage 0-10V or RTD (Pt100, Pt500, etc.)
- 4-digit LED display + 51 pcs LED bargraph; keypad
- Programmable range and dec. point
- Panel mountable, protection IP30
- Optional: up to 2 output relays; current output 4-20mA or RS485 interface; integrated 24VDC power supply for transmitter
Programmable Process Indicator with Bargraph BG251 series
current input 0(4)-20mA or voltage input 0-10V, 2 x 4 digit LED display (14mm high) + 2 x LED bargraph of 51 pieces, keyboard, programmable range and decimal point position, 90-250V power supply, dimensions 72x144x115mm, panel mountable, IP30
Programmable Process Indicator PC7M series
- Inputs: 0 (4)...20 mA DC, RTD Pt100, TC
- Two programmable relay outputs
- Current output proportional to the measured values...
Programmable Process Indicator 4007 series
Universal analogue input:
- current 0-5, 0-20 or 4-20mADC
- voltage 0-1, 0-5 or 0-10VDC
- RTD type Pt100 (Pt500, Pt1000)
- TC type J, K, E, S, R, B with cold junction compensation and linearization
The input signal type and range could be set through the keyboard.
Programmable Process Indicator D7000 series
